Адаптация дроссельной заслонки

Авто chery tiggo fl 2015, 1.8 робот Возникла необходимость адаптации дроссельной заслонки, но те методы, что дает Чери не работают: 1)Turn the ignition switch ON, wait for 1 minute, and then turn the ignition switch OFF. Do not operate any other components during operation. 2) 1.Turn on the ignition key without starting the engine, and wait until the self-check is completed. 2.For 1.8 L AMT model, clear the old self-learning parameters with the "Clearing the engine's self-adaptive parameters" function in the diagnostic tester, and then turn off the ignition key for 10 seconds. 3.Turn the ignition key to ON without starting the engine, and turn off the ignition key for more than 5 seconds after the self-check is completed; repeat the process above for 3 ~ 5 times. Может здесь не все написано или есть еще какая-то процедура?